This browser is no longer supported. Upgrade to Microsoft Edge or switch to a supported browser, like Chrome, Safari, or Firefox, to explore the MW Components website.

We're sorry for the inconvenience.

TO-1075CS - Spring Steel Torsion Springs

Inventory Status
In-stock
Estimated Lead Time
In-stock parts: usually ships in 12-24 hours

The TO-1075CS is a torsion spring manufactured by Century Spring. This spring is made from spring steel and does not have a finish. It has an inside diameter of 0.141 inches, an outside diameter of 0.183 inches, and a body length of 0.16 inches. The leg length measures 0.78 inches, and the mandrel diameter is 0.11 inches. The TO-1075CS has a wire diameter of 0.021 Inch and a total of 6 coils. It has a rotational angle of 180 degrees and a small rotational rate of 0.0015 Inch-Pounds per Degree. The maximum torque it can handle is 0.18 lbs/inch, and it has a maximum rotational deflection of 113 degrees. This torsion spring is enabled and belongs to the Springs - Torsion category.

At Century Spring, we pride ourselves on our fast shipping and extensive stock inventory. We understand the importance of receiving your springs promptly for your projects. That's why we offer reliable and efficient shipping services. Additionally, all our products, including the TO-1075CS, are proudly made in the United States. You can trust Century Spring to deliver high-quality springs and exceptional service.

Unit System
View Spec Sheet
Specs (in standard)
Label Value
Angle Between Legs 180 deg
Body Length 0.16 in
Brand Century Spring
Finish None
Inside Diameter 0.141 in
Leg Length 0.78 in
Mandrel Diameter 0.11 in
Material Spring Steel
Max Deflection (deg) (suggested) 113
Max Torque (suggested) 0.18 lbs/in
Measurement Units Standard
Outside Diameter 0.183 in
Rate 0.0015 lbf-in/deg
SKU TO-1075CS
Total Coils 6
Wind Direction Right
Wire Diameter 0.021 in
Specs (in metric)
Label Value
Angle Between Legs 180 deg
Body Length 4.06 mm
Brand Century Spring
Finish None
Inside Diameter 3.58 mm
Leg Length 19.81 mm
Mandrel Diameter 2.79 mm
Material Spring Steel
Max Deflection (deg) (suggested) 113
Max Torque (suggested) 0.03 N-mm
Measurement Units Standard
Outside Diameter 4.65 mm
Rate 0.17 N-mm/deg
SKU TO-1075CS
Total Coils 6
Wind Direction Right
Wire Diameter 0.53 mm